73 lines
2.3 KiB
Verilog
73 lines
2.3 KiB
Verilog
// -----------------------------------------------------------------------------
|
|
// tb_z2_demo_ice.v -- Local-only bench for the ICE top.
|
|
// In real ICE mode there is no testbench at all: clk/rst come from the target
|
|
// or emulator clock setup and the result is the PASS/FAIL LEDs. This bench
|
|
// only supplies clock/reset locally and watches the LEDs, so the stimulus
|
|
// FSM itself can be verified before an ICE compile.
|
|
// -----------------------------------------------------------------------------
|
|
`timescale 1ns/1ps
|
|
|
|
module tb_z2_demo_ice;
|
|
reg clk;
|
|
reg rst_n;
|
|
wire [7:0] led_gpio;
|
|
wire led_irq;
|
|
wire led_done;
|
|
wire led_pass;
|
|
wire led_fail;
|
|
integer cycles;
|
|
integer errors;
|
|
|
|
z2_demo_ice_top top (
|
|
.clk_in (clk),
|
|
.rst_n_in (rst_n),
|
|
.led_gpio (led_gpio),
|
|
.led_irq (led_irq),
|
|
.led_done (led_done),
|
|
.led_pass (led_pass),
|
|
.led_fail (led_fail)
|
|
);
|
|
|
|
initial clk = 1'b0;
|
|
always #5 clk = ~clk;
|
|
|
|
initial begin
|
|
$dumpfile("ice/sim_local/z2_demo_ice.vcd");
|
|
$dumpvars(0, tb_z2_demo_ice);
|
|
errors = 0;
|
|
rst_n = 1'b0;
|
|
repeat (4) @(negedge clk);
|
|
rst_n = 1'b1;
|
|
|
|
// wait for the hardware sequence to finish (guard: 1000 cycles)
|
|
cycles = 0;
|
|
while (!led_done && cycles < 1000) begin
|
|
@(negedge clk);
|
|
cycles = cycles + 1;
|
|
end
|
|
|
|
if (!led_done) begin
|
|
$display("CHECK FAIL : ICE sequence did not finish in 1000 cycles");
|
|
errors = errors + 1;
|
|
end else begin
|
|
$display("CHECK OK : ICE sequence finished in %0d cycles", cycles);
|
|
end
|
|
if (led_pass && !led_fail)
|
|
$display("CHECK OK : led_pass=1 led_fail=0");
|
|
else begin
|
|
$display("CHECK FAIL : led_pass=%b led_fail=%b", led_pass, led_fail);
|
|
errors = errors + 1;
|
|
end
|
|
if (led_gpio === 8'h02)
|
|
$display("CHECK OK : led_gpio pattern = 0x02 (rotated once)");
|
|
else begin
|
|
$display("CHECK FAIL : led_gpio = 0x%02h, expected 0x02", led_gpio);
|
|
errors = errors + 1;
|
|
end
|
|
|
|
if (errors == 0) $display("ICE LOCAL TEST PASSED");
|
|
else $display("ICE LOCAL TEST FAILED (%0d)", errors);
|
|
$finish;
|
|
end
|
|
endmodule
|