// ----------------------------------------------------------------------------- // z3_demo_top.v -- Palladium Z3 emulation demo DUT // (Identical to root rtl/z3_demo_top.v) // ----------------------------------------------------------------------------- `timescale 1ns/1ps module z3_demo_top ( input wire clk, input wire rst_n, // APB-like slave bus input wire [7:0] paddr, input wire psel, input wire penable, input wire pwrite, input wire [31:0] pwdata, output reg [31:0] prdata, output wire pready, // Observable outputs output wire [7:0] gpio_out, output wire irq, output wire cmp_hit ); reg ctrl_enable; reg ctrl_irq_en; reg ctrl_pattern_en; reg [31:0] reg_load; reg [31:0] reg_count; reg [31:0] reg_cmp; reg status_timeout; reg status_cmp; reg [7:0] reg_gpio; assign pready = 1'b1; assign gpio_out = reg_gpio; assign irq = status_timeout & ctrl_irq_en; wire bus_write = psel & penable & pwrite; wire bus_read = psel & penable & ~pwrite; wire timeout_now = ctrl_enable & (reg_count == 32'd0); assign cmp_hit = ctrl_enable & (reg_count == reg_cmp); always @(posedge clk or negedge rst_n) begin if (!rst_n) begin ctrl_enable <= 1'b0; ctrl_irq_en <= 1'b0; ctrl_pattern_en <= 1'b0; reg_load <= 32'd9; reg_cmp <= 32'd3; reg_gpio <= 8'h01; status_timeout <= 1'b0; status_cmp <= 1'b0; end else begin if (timeout_now) status_timeout <= 1'b1; if (cmp_hit) status_cmp <= 1'b1; if (bus_write) begin case (paddr[7:0]) 8'h00: begin ctrl_enable <= pwdata[0]; ctrl_irq_en <= pwdata[1]; ctrl_pattern_en <= pwdata[2]; end 8'h04: begin reg_load <= pwdata; reg_count <= pwdata; end 8'h0C: reg_cmp <= pwdata; 8'h10: begin if (pwdata[0]) status_timeout <= 1'b0; if (pwdata[1]) status_cmp <= 1'b0; end 8'h14: reg_gpio <= pwdata[7:0]; default: ; endcase end else if (ctrl_enable) begin if (reg_count == 32'd0) begin reg_count <= reg_load; if (ctrl_pattern_en) reg_gpio <= {reg_gpio[6:0], reg_gpio[7]}; end else begin reg_count <= reg_count - 32'd1; end end end end always @(*) begin if (bus_read) begin case (paddr[7:0]) 8'h00: prdata = {29'b0, ctrl_pattern_en, ctrl_irq_en, ctrl_enable}; 8'h04: prdata = reg_load; 8'h08: prdata = reg_count; 8'h0C: prdata = reg_cmp; 8'h10: prdata = {30'b0, status_cmp, status_timeout}; 8'h14: prdata = {24'b0, reg_gpio}; 8'h18: prdata = 32'h5A33_0001; // Z3 ID default: prdata = 32'hDEAD_BEEF; endcase end else begin prdata = 32'h0; end end endmodule