feat: complete Palladium Z3 demo (SA & ICE dual-mode) and 24.05 hardware compilation fix

This commit is contained in:
xuejin.wang
2026-10-20 19:01:16 +08:00
commit 1cc994fac4
18 changed files with 1445 additions and 0 deletions
+108
View File
@@ -0,0 +1,108 @@
// -----------------------------------------------------------------------------
// z3_demo_top.v -- Palladium Z3 emulation demo DUT
// (Identical to root rtl/z3_demo_top.v)
// -----------------------------------------------------------------------------
`timescale 1ns/1ps
module z3_demo_top (
input wire clk,
input wire rst_n,
// APB-like slave bus
input wire [7:0] paddr,
input wire psel,
input wire penable,
input wire pwrite,
input wire [31:0] pwdata,
output reg [31:0] prdata,
output wire pready,
// Observable outputs
output wire [7:0] gpio_out,
output wire irq,
output wire cmp_hit
);
reg ctrl_enable;
reg ctrl_irq_en;
reg ctrl_pattern_en;
reg [31:0] reg_load;
reg [31:0] reg_count;
reg [31:0] reg_cmp;
reg status_timeout;
reg status_cmp;
reg [7:0] reg_gpio;
assign pready = 1'b1;
assign gpio_out = reg_gpio;
assign irq = status_timeout & ctrl_irq_en;
wire bus_write = psel & penable & pwrite;
wire bus_read = psel & penable & ~pwrite;
wire timeout_now = ctrl_enable & (reg_count == 32'd0);
assign cmp_hit = ctrl_enable & (reg_count == reg_cmp);
always @(posedge clk or negedge rst_n) begin
if (!rst_n) begin
ctrl_enable <= 1'b0;
ctrl_irq_en <= 1'b0;
ctrl_pattern_en <= 1'b0;
reg_load <= 32'd9;
reg_cmp <= 32'd3;
reg_gpio <= 8'h01;
status_timeout <= 1'b0;
status_cmp <= 1'b0;
end else begin
if (timeout_now)
status_timeout <= 1'b1;
if (cmp_hit)
status_cmp <= 1'b1;
if (bus_write) begin
case (paddr[7:0])
8'h00: begin
ctrl_enable <= pwdata[0];
ctrl_irq_en <= pwdata[1];
ctrl_pattern_en <= pwdata[2];
end
8'h04: begin
reg_load <= pwdata;
reg_count <= pwdata;
end
8'h0C: reg_cmp <= pwdata;
8'h10: begin
if (pwdata[0]) status_timeout <= 1'b0;
if (pwdata[1]) status_cmp <= 1'b0;
end
8'h14: reg_gpio <= pwdata[7:0];
default: ;
endcase
end else if (ctrl_enable) begin
if (reg_count == 32'd0) begin
reg_count <= reg_load;
if (ctrl_pattern_en)
reg_gpio <= {reg_gpio[6:0], reg_gpio[7]};
end else begin
reg_count <= reg_count - 32'd1;
end
end
end
end
always @(*) begin
if (bus_read) begin
case (paddr[7:0])
8'h00: prdata = {29'b0, ctrl_pattern_en, ctrl_irq_en, ctrl_enable};
8'h04: prdata = reg_load;
8'h08: prdata = reg_count;
8'h0C: prdata = reg_cmp;
8'h10: prdata = {30'b0, status_cmp, status_timeout};
8'h14: prdata = {24'b0, reg_gpio};
8'h18: prdata = 32'h5A33_0001; // Z3 ID
default: prdata = 32'hDEAD_BEEF;
endcase
end else begin
prdata = 32'h0;
end
end
endmodule